PIE 820ELITE

Description

• Lighten up your toolbox Compact calibrator replaces toolbox of single function devices Milliamp • Voltage • Frequency • pH • Thermocouples • RTDs • Check Continuity • Pressure
• Technician friendly operation Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. Similar to the single function PIE Calibrators.
• Use it as a milliamp and voltage calibrator
  • Source 0 to 24.000 mA, 0 to 10.250 V dc, -20.000 to 99.999 mV and -500.00 to 999.99 mV
  • Read to 24.000 mA, 60.00 V dc ±99.999 mV and ±999.99 mV Simulate 2-Wire Transmitters
  • Simulate 2-Wire Transmitters
  • Power up transmitters & loops with the built-in 24 V power supply
  • Simplify HART hookups with built-in 250 Ohm resistor

  >

• Troubleshoot loop problems Quickly diagnose ground fault and current leakage with patented loop diagnostic technology (US Patent 7,248,058).
• Calibrate directly in temperature to 0.1°C &0.1 °F Compatible with the instruments you use including all brands of smart transmitters and PLCs with 14 thermocouple & 9 RTD types.
• Checkout flow and vibration systems Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz & to 20.000 kHz.
• Troubleshoot loop & wiring problems ‘Beep’ out connections with the built-in continuity checker
• Simulate pH probes into transmitters & analyzers Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to -414.12 to 414.12 mV
• Measure pressure with optional pressure modules 32 modules for gauge, differential, compound and absolute pressure
• Easy to read Turn on the backlight & easily see the display in dark areas of the plant.
• Quickly set any three outputs plus automatic stepping & ramping Easily set any value with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. 2, 3, 5 & 11 steps automatically increment output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output. Set step/ramp time to 5, 6, 7, 8, 10, 15, 20, 25, 30 & 60 seconds.
• Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability
• Evolutionary design PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators manufactured by Fluke* under the Altek* label. The PIECAL 820 improves upon other brands by including a rubber boot, a backlit display with larger digits, higher accuracy and more ranges for greater flexibility.

>

Each Unit Includes

• Four “AA” Alkaline batteries
• Certificate of Calibration
• Blue Rubber Boot
• Evolution Hands Free Carrying Case
• Evolution mA/V Test Leads 1 Red & 1 Black Lead with Banana Plugs & Alligator Clips
• Evolution RTD Wire Kit 2 Red & 2 Black Leads with Banana Plugs & Spade Lugs